1. What are Infrared Touch Screens?
Infrared Touch Screens (IR Touch Screens) are a contactless touch technology that uses the principle of infrared sensing for touch interaction. Unlike capacitive or resistive touchscreens, IR touchscreens do not rely on physical pressure or changes in electrical current, but instead use optical sensors to detect the touch position, resulting in high durability and wide applicability.
2. How Infrared Touch Screens Work
Infrared Touch Screens create an invisible infrared grating through infrared emitters and receivers mounted on the edge of the screen. When the user’s finger or object (such as a stylus) touches the screen, it will block certain infrared beams, resulting in a signal interruption at specific coordinates. The system detects these changes through the optical sensors and calculates the position of the touch point to achieve precise touch operation.
3. Key Factors in Evaluating Infrared Touch Screens
The following factors need to be considered when choosing the right Infrared Touch Screens:
Screen size: Suitable for medium to large size displays (commonly 32’ and above).
Number of Touch Points: Supports 2, 4, 10 or more multi-touch points.
Response Speed: High quality infrared screens can achieve <10ms touch response.
Environmental Adaptability: Suitable for outdoor, bright light exposure or industrial environments.
Durability: No physical contact wear and tear, suitable for high-frequency use scenarios.
4. Advantages and Limitations of Infrared Touch Screens
✅ Advantages:
High durability: no physical wear and tear, suitable for public and industrial environments.
Large size compatibility: Can be applied to displays from 32‘’ to over 100‘’.
Multi-touch: Supports simultaneous operation by multiple people to enhance the interactive experience.
High light transmittance: no glass cover, clear picture quality without affecting the display effect.
Low Maintenance: No capacitive layer or film, no need for frequent calibration.
⚠️ limitations:
Affected by ambient light: strong direct light may affect touch accuracy.
Not suitable for small devices: difficult to apply to screens under 10’.
Requires dust protection: Dust or foreign matter may interfere with infrared sensing.
5. How do I install Infrared Touch Screens?
Installing Infrared Touch Screens mainly includes the following steps:
Frame Fixing: Mount the IR frame on the edge of the monitor.
Sensor Alignment: Make sure the IR emitter and receiver are aligned to form a complete grating.
Connect Controller: Connect the touch screen control system via USB or other interface.
Software Configuration: Install drivers and perform calibration to ensure touch accuracy.
6. Technical Advantages of Infrared Touch Screens
Accurate touch detection: even stylus, gloves or other non-conductive objects can be accurately identified.
Multi-touch support: suitable for multi-user interaction scenarios, such as conference systems.
Durable and reliable: no physical wear and tear, suitable for high-frequency use.
Uncompromised image quality: no degradation of screen brightness and clarity.
Simple Maintenance: No need for frequent calibration, low daily maintenance costs.
Fast Response: Achieves <10ms touch response time.
Suitable for large displays: supports sizes of 32’ and above without complex structures.
Electromagnetic interference free: Suitable for medical, industrial and other special application scenarios.
7. Key features of Infrared Touch Screens
Reliable durability: no physical contact, long life.
High clarity and brightness: no extra diaphragm, does not affect the visual effect.
Support multiple input methods: finger, glove, stylus, etc. can be used.
Low maintenance cost: no need to replace the touch layer or calibrate the sensor.
Customisable size: can be adapted to different sizes of displays and interactive devices.
8. Infrared touch screens versus other touch technologies
Characteristics | Infrared Touch Screen | Capacitive Touch Screen | Resistive Touch Screen |
Touch Accuracy | high | high | Medium |
Multi-touch | Support | Support | Not supported |
Light Transmission | High | High | Low |
Durability | High | Medium | Low |
Maintenance Requirements | Low | Low | High |
Applicable Size | 32″+ | 3″~32’ | 3″~20’ |
Environmental Adaptability | Strong | General | General |
9. Maintenance and care tips for Infrared Touch Screens
Regular cleaning: Use a dry soft cloth to wipe the screen to avoid accumulation of dust affecting the sensing.
Avoid direct sunlight: Strong light may interfere with infrared sensing, and a light shielding design can be used.
Check the connection interface: Make sure the USB or controller interface is stable to avoid touch failure.
Stay away from high temperature and high humidity environment: avoid sensor failure due to environmental changes.
10. Industry Applications of Infrared Touch Screens
Digital signage: shopping malls, airports, self-service enquiry terminals.
Conference and education: intelligent whiteboard, large size interactive touch screen.
Industrial automation: clean room, intelligent control system.
Medical equipment: not subject to electromagnetic interference, suitable for medical touch interface.
Games and entertainment: large interactive touch wall, e-sports equipment.
11. Future Trends of Infrared Touch Screens
With the development of intelligent interaction technology, the application of infrared touch screen in the field of large-size touch control, intelligent conference, outdoor interactive equipment will continue to grow. In the future, faster response speed, more accurate multi-touch, and higher environmental adaptability will become the key direction of technological upgrading, while the combination with AI, 5G, and IoT will also broaden its application scenarios.
If you need reliable touch solutions, COMPT’s industrial monitors and industrual panel computers are the ideal choice. We offer high-performance infrared touch technology that ensures fast response and superior displays for a variety of industrial needs.

Penny
Web Content Writer
4 years of experience
This article is edited by Penny, the website content writer of COMPT, who has 4 years working experience in the industrial PCs industry and often discusses with colleagues in R&D, marketing and production departments about the professional knowledge and application of industrial controllers, and has a deep understanding of the industry and products.
Please feel free to contact me to discuss more about industrial controllers. sales@gdcompt.com